🎉 Up to 70% Off Selected ItemsShop Sale
RitFit Mustang PRO Leg Extension Curl Machine
FEATURES
Adjustable Load Ratio for Custom Intensity The Mustang PRO's innovative adjustable load-ratio system offers four distinct resistance settings, ranging from lighter to heavier (0.8×, 1.05×, 1.15×, 1.3×). Simply pull the pin to instantly dial in the challenge, with all four settings switching smoothly in seconds while you remain seated and without unloading plates. This gives lifters of all levels the ability to fine-tune every set, push past plateaus, make steady progress, and easily reduce resistance for true within-set failure training.
All-in-One Quad & Hamstring Station Train both leg extensions and lying leg curls on a single, space-efficient machine. A simple pull-pin lets you switch between quad and hamstring modes in seconds, making it easy to run supersets, save space, and get more done in less time, all without changing equipment. Every movement also supports single-leg training, so you can isolate each side and help correct muscle imbalances.
Premium Comfort for Every Set Extra-wide 2.36 inches thick seat and back pads, paired with large 4.80 inches diameter foam rollers, distribute pressure evenly so heavy sets stay comfortable and secure. Upgraded rubber grips, smooth cable travel, and band-peg compatibility complete the premium training experience.
400 lb Capacity & Rock-Solid X-Frame Stability Built from heavy-duty 1.97 × 2.76 inches (50×70 mm / 14-gauge) steel tubing, the reinforced X-frame delivers exceptional rigidity and balance. The machine supports up to 400 lb of loaded weight and users up to 550 lb, providing a planted, confidence-inspiring feel that rivals commercial gym equipment.
Butter-Smooth Cable Motion High-quality aluminum pulleys combined with multi-bearing and linear-bearing components create an exceptionally smooth resistance path. The result is fluid, controlled motion with minimal friction — helping protect your joints, improve control, and maintain consistent tension throughout every rep, without the dead spots and lockout drop-off that plague lever-only machines.
Ergonomic Adjustments for Any Body Size The synchronized seat and backrest offer multiple adjustments: the first two settings optimize seated leg extensions with slightly different quad emphasis, while the third locks in a 15° incline for lying curls. This ergonomically tuned angle keeps your pelvis neutral, minimizing lower-back stress for peak hamstring isolation.
MORE DETAILS
Quiet, Home-Friendly Motion Sealed pulleys and an optimized cable path minimize noise and vibration, making this machine ideal for garages, basements, or shared living spaces.
Wide Stable Base for Heavy Lifts The 48-inch-wide base and X-frame load-section keep all four feet planted under heavy loads — no sway, no creep, no rerack to recenter the bar. This is the kind of stability serious leg-day work demands when fatigue starts to bite at form.
Premium Powder-Coated Frame Thick-gauge steel with a durable powder-coat finish resists chips, scuffs, and rust, so your machine keeps looking new after years of sweaty workouts.
Easy Plate Compatibility A long weight horn fits 2-inch Olympic plates with room to grow. You simply slide on more weight as your legs get stronger.
Comfort-First Touch Points Rounded edges, soft vinyl upholstery, and foam-wrapped contact areas reduce pinching and pressure, so you focus on muscle burn — not joint discomfort.
Embossed Grain Pad Surface A finely embossed grain across the textured, easy-clean vinyl upholstery gives the seat and backrest a leather-like feel — grippy under sweat and crack-resistant where smooth vinyl fails over time.
CORE SPECS
Core Specs
|
Weight Loading Capacity
|
400 lb
|
|
Max User Weight
|
550 lb
|
|
Suggested User Height
|
5'1"–6'5" (1.55–1.95 m)
|
|
Adjustable Load Ratio
|
4 positions: 0.8x / 1.05x / 1.15x / 1.3x
|
|
Net Weight (Assembled)
|
150 lb (68 kg)
|
Uprights & Frame
|
Main Frame Tubing
|
1.97 × 2.76 in (50×70 mm) × 1.8 mm wall (14-gauge) — main; 50×50 mm × 1.5 mm wall (16-gauge) — secondary
|
|
Frame Finish
|
Powder-coated black
|
|
Frame Stability
|
X-frame load-bearing section + 48-inch-wide base
|
|
Cam Pulley
|
12-position aluminum + Q235 zinc; multi-bearing + linear-axis-bearing
|
Pads & Handles
|
Seat Pad
|
15.6 × 16.8 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over recycled bonded foam
|
|
Backrest Pad
|
12.4 × 24 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over EPE foam
|
|
Backrest Adjustment
|
3 synchronized positions (seat -18.5° / -11.2° / +15°; backrest pad 95.6° / 114.6° / 146.4°)
|
|
Handles
|
2 × 150 mm single-piece anti-slip rubber
|
Rollers
|
Leg Roller
|
4.80 in (122 mm) diameter × 19.3 in (490 mm) long
|
|
Roller Filling
|
High-density EVA pearl-cotton foam
|
|
Roller Cover
|
Textured vinyl cover
|
Compatibility & Mechanics
|
Plate Type
|
2-inch Olympic only
|
|
Load Bar
|
4-position pull-pin slide; 350 mm effective length; 75.3 mm position spacing
|
|
Storage Post
|
13 in (330 mm) effective length; steel + paint
|
|
Band Pegs
|
2 × 63 mm twist-mount Q235 + electroplated zinc
|
SHIPPING
Free shipping to lower 48 states. Ships in 2 boxes, usually within 2-3 business days. Tracking provided for every order.
$529.99
RitFit Mustang PRO Leg Extension Curl Machine—
$529.99
More Images
RitFit Mustang PRO Leg Extension Curl Machine
FEATURES
Adjustable Load Ratio for Custom Intensity The Mustang PRO's innovative adjustable load-ratio system offers four distinct resistance settings, ranging from lighter to heavier (0.8×, 1.05×, 1.15×, 1.3×). Simply pull the pin to instantly dial in the challenge, with all four settings switching smoothly in seconds while you remain seated and without unloading plates. This gives lifters of all levels the ability to fine-tune every set, push past plateaus, make steady progress, and easily reduce resistance for true within-set failure training.
All-in-One Quad & Hamstring Station Train both leg extensions and lying leg curls on a single, space-efficient machine. A simple pull-pin lets you switch between quad and hamstring modes in seconds, making it easy to run supersets, save space, and get more done in less time, all without changing equipment. Every movement also supports single-leg training, so you can isolate each side and help correct muscle imbalances.
Premium Comfort for Every Set Extra-wide 2.36 inches thick seat and back pads, paired with large 4.80 inches diameter foam rollers, distribute pressure evenly so heavy sets stay comfortable and secure. Upgraded rubber grips, smooth cable travel, and band-peg compatibility complete the premium training experience.
400 lb Capacity & Rock-Solid X-Frame Stability Built from heavy-duty 1.97 × 2.76 inches (50×70 mm / 14-gauge) steel tubing, the reinforced X-frame delivers exceptional rigidity and balance. The machine supports up to 400 lb of loaded weight and users up to 550 lb, providing a planted, confidence-inspiring feel that rivals commercial gym equipment.
Butter-Smooth Cable Motion High-quality aluminum pulleys combined with multi-bearing and linear-bearing components create an exceptionally smooth resistance path. The result is fluid, controlled motion with minimal friction — helping protect your joints, improve control, and maintain consistent tension throughout every rep, without the dead spots and lockout drop-off that plague lever-only machines.
Ergonomic Adjustments for Any Body Size The synchronized seat and backrest offer multiple adjustments: the first two settings optimize seated leg extensions with slightly different quad emphasis, while the third locks in a 15° incline for lying curls. This ergonomically tuned angle keeps your pelvis neutral, minimizing lower-back stress for peak hamstring isolation.
MORE DETAILS
Quiet, Home-Friendly Motion Sealed pulleys and an optimized cable path minimize noise and vibration, making this machine ideal for garages, basements, or shared living spaces.
Wide Stable Base for Heavy Lifts The 48-inch-wide base and X-frame load-section keep all four feet planted under heavy loads — no sway, no creep, no rerack to recenter the bar. This is the kind of stability serious leg-day work demands when fatigue starts to bite at form.
Premium Powder-Coated Frame Thick-gauge steel with a durable powder-coat finish resists chips, scuffs, and rust, so your machine keeps looking new after years of sweaty workouts.
Easy Plate Compatibility A long weight horn fits 2-inch Olympic plates with room to grow. You simply slide on more weight as your legs get stronger.
Comfort-First Touch Points Rounded edges, soft vinyl upholstery, and foam-wrapped contact areas reduce pinching and pressure, so you focus on muscle burn — not joint discomfort.
Embossed Grain Pad Surface A finely embossed grain across the textured, easy-clean vinyl upholstery gives the seat and backrest a leather-like feel — grippy under sweat and crack-resistant where smooth vinyl fails over time.
CORE SPECS
Core Specs
|
Weight Loading Capacity
|
400 lb
|
|
Max User Weight
|
550 lb
|
|
Suggested User Height
|
5'1"–6'5" (1.55–1.95 m)
|
|
Adjustable Load Ratio
|
4 positions: 0.8x / 1.05x / 1.15x / 1.3x
|
|
Net Weight (Assembled)
|
150 lb (68 kg)
|
Uprights & Frame
|
Main Frame Tubing
|
1.97 × 2.76 in (50×70 mm) × 1.8 mm wall (14-gauge) — main; 50×50 mm × 1.5 mm wall (16-gauge) — secondary
|
|
Frame Finish
|
Powder-coated black
|
|
Frame Stability
|
X-frame load-bearing section + 48-inch-wide base
|
|
Cam Pulley
|
12-position aluminum + Q235 zinc; multi-bearing + linear-axis-bearing
|
Pads & Handles
|
Seat Pad
|
15.6 × 16.8 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over recycled bonded foam
|
|
Backrest Pad
|
12.4 × 24 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over EPE foam
|
|
Backrest Adjustment
|
3 synchronized positions (seat -18.5° / -11.2° / +15°; backrest pad 95.6° / 114.6° / 146.4°)
|
|
Handles
|
2 × 150 mm single-piece anti-slip rubber
|
Rollers
|
Leg Roller
|
4.80 in (122 mm) diameter × 19.3 in (490 mm) long
|
|
Roller Filling
|
High-density EVA pearl-cotton foam
|
|
Roller Cover
|
Textured vinyl cover
|
Compatibility & Mechanics
|
Plate Type
|
2-inch Olympic only
|
|
Load Bar
|
4-position pull-pin slide; 350 mm effective length; 75.3 mm position spacing
|
|
Storage Post
|
13 in (330 mm) effective length; steel + paint
|
|
Band Pegs
|
2 × 63 mm twist-mount Q235 + electroplated zinc
|
SHIPPING
Free shipping to lower 48 states. Ships in 2 boxes, usually within 2-3 business days. Tracking provided for every order.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
FEATURES
Adjustable Load Ratio for Custom Intensity The Mustang PRO's innovative adjustable load-ratio system offers four distinct resistance settings, ranging from lighter to heavier (0.8×, 1.05×, 1.15×, 1.3×). Simply pull the pin to instantly dial in the challenge, with all four settings switching smoothly in seconds while you remain seated and without unloading plates. This gives lifters of all levels the ability to fine-tune every set, push past plateaus, make steady progress, and easily reduce resistance for true within-set failure training.
All-in-One Quad & Hamstring Station Train both leg extensions and lying leg curls on a single, space-efficient machine. A simple pull-pin lets you switch between quad and hamstring modes in seconds, making it easy to run supersets, save space, and get more done in less time, all without changing equipment. Every movement also supports single-leg training, so you can isolate each side and help correct muscle imbalances.
Premium Comfort for Every Set Extra-wide 2.36 inches thick seat and back pads, paired with large 4.80 inches diameter foam rollers, distribute pressure evenly so heavy sets stay comfortable and secure. Upgraded rubber grips, smooth cable travel, and band-peg compatibility complete the premium training experience.
400 lb Capacity & Rock-Solid X-Frame Stability Built from heavy-duty 1.97 × 2.76 inches (50×70 mm / 14-gauge) steel tubing, the reinforced X-frame delivers exceptional rigidity and balance. The machine supports up to 400 lb of loaded weight and users up to 550 lb, providing a planted, confidence-inspiring feel that rivals commercial gym equipment.
Butter-Smooth Cable Motion High-quality aluminum pulleys combined with multi-bearing and linear-bearing components create an exceptionally smooth resistance path. The result is fluid, controlled motion with minimal friction — helping protect your joints, improve control, and maintain consistent tension throughout every rep, without the dead spots and lockout drop-off that plague lever-only machines.
Ergonomic Adjustments for Any Body Size The synchronized seat and backrest offer multiple adjustments: the first two settings optimize seated leg extensions with slightly different quad emphasis, while the third locks in a 15° incline for lying curls. This ergonomically tuned angle keeps your pelvis neutral, minimizing lower-back stress for peak hamstring isolation.
MORE DETAILS
Quiet, Home-Friendly Motion Sealed pulleys and an optimized cable path minimize noise and vibration, making this machine ideal for garages, basements, or shared living spaces.
Wide Stable Base for Heavy Lifts The 48-inch-wide base and X-frame load-section keep all four feet planted under heavy loads — no sway, no creep, no rerack to recenter the bar. This is the kind of stability serious leg-day work demands when fatigue starts to bite at form.
Premium Powder-Coated Frame Thick-gauge steel with a durable powder-coat finish resists chips, scuffs, and rust, so your machine keeps looking new after years of sweaty workouts.
Easy Plate Compatibility A long weight horn fits 2-inch Olympic plates with room to grow. You simply slide on more weight as your legs get stronger.
Comfort-First Touch Points Rounded edges, soft vinyl upholstery, and foam-wrapped contact areas reduce pinching and pressure, so you focus on muscle burn — not joint discomfort.
Embossed Grain Pad Surface A finely embossed grain across the textured, easy-clean vinyl upholstery gives the seat and backrest a leather-like feel — grippy under sweat and crack-resistant where smooth vinyl fails over time.
CORE SPECS
Core Specs
|
Weight Loading Capacity
|
400 lb
|
|
Max User Weight
|
550 lb
|
|
Suggested User Height
|
5'1"–6'5" (1.55–1.95 m)
|
|
Adjustable Load Ratio
|
4 positions: 0.8x / 1.05x / 1.15x / 1.3x
|
|
Net Weight (Assembled)
|
150 lb (68 kg)
|
Uprights & Frame
|
Main Frame Tubing
|
1.97 × 2.76 in (50×70 mm) × 1.8 mm wall (14-gauge) — main; 50×50 mm × 1.5 mm wall (16-gauge) — secondary
|
|
Frame Finish
|
Powder-coated black
|
|
Frame Stability
|
X-frame load-bearing section + 48-inch-wide base
|
|
Cam Pulley
|
12-position aluminum + Q235 zinc; multi-bearing + linear-axis-bearing
|
Pads & Handles
|
Seat Pad
|
15.6 × 16.8 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over recycled bonded foam
|
|
Backrest Pad
|
12.4 × 24 in × 60 mm (2.36 in) thick; textured, easy-clean vinyl upholstery over EPE foam
|
|
Backrest Adjustment
|
3 synchronized positions (seat -18.5° / -11.2° / +15°; backrest pad 95.6° / 114.6° / 146.4°)
|
|
Handles
|
2 × 150 mm single-piece anti-slip rubber
|
Rollers
|
Leg Roller
|
4.80 in (122 mm) diameter × 19.3 in (490 mm) long
|
|
Roller Filling
|
High-density EVA pearl-cotton foam
|
|
Roller Cover
|
Textured vinyl cover
|
Compatibility & Mechanics
|
Plate Type
|
2-inch Olympic only
|
|
Load Bar
|
4-position pull-pin slide; 350 mm effective length; 75.3 mm position spacing
|
|
Storage Post
|
13 in (330 mm) effective length; steel + paint
|
|
Band Pegs
|
2 × 63 mm twist-mount Q235 + electroplated zinc
|
SHIPPING
Free shipping to lower 48 states. Ships in 2 boxes, usually within 2-3 business days. Tracking provided for every order.
